Description

【Halloween Limited Edition Color】
This stainless steel bottle features a trendy pearl ribbon.
The cap of the stainless steel bottle can be easily opened by simply turning it 90 degrees.
It has a 500ml size that can hold a sufficient amount of beverage.
Enjoy customizing your bottle by attaching charms sold separately.

Specifications

Size: W73×D73×H210mm Capacity: 500ml
Material: Body: Stainless steel, Lid (body): ABS resin, Lid (receiving part): Polypropylene, Gasket: Silicone rubber, Bottom cover: Silicone rubber, Charm fittings: Zinc alloy, Ribbon: Plastic, Heart: Polyester

Care Instruction

■Microwave: Not allowed
■Direct flame: Not allowed
■IH cooker: Not allowed
■Dishwasher: Not allowed
■Dish dryer: Not allowed
■Do not allow infants to use this product.
■Keep out of reach of infants. There is a risk of burns and injuries.
■Do not carry it in a bag or similar container. This may cause leaks or damage.
■Do not use products with reduced heat retention or cooling performance.
■If you put hot drinks in it, the outside will become hot and there is a risk of burns.
■Do not use if you hear a watering sound from inside the vacuum layer. The water inside may cause illness.
■Do not place it near open flames such as stoves or cooktops. There is a risk of burns, deformation, or discoloration.
■Do not modify or disassemble and repair it. This may cause malfunctions or accidents.
■Do not heat it in a microwave oven. This may cause sparks, deformation, or discoloration.
■Do not drink it while driving. This may cause burns or stains inside the car.
■Do not place it on open flames, electric heaters, or induction cooktops. This may cause fire or malfunction.
■Do not use it for purposes other than keeping drinks hot or cold.
■Never put the following items in it.
・Dry ice, carbonated drinks, etc.: The pressure inside the product may increase, causing the drink to spray out or the lid to break and scatter.
・Miso soup, soup, kelp tea, etc., which contain a lot of salt: This may cause rust or a decrease in heat retention and cooling performance.
・Milk, dairy drinks, fruit juice, etc.: The ingredients may spoil. If left for a long time, spoilage will generate gas, increasing the pressure inside the product, which may cause the drink to spray out or the lid etc. to break and scatter.
・Fruit pulp, tea leaves, etc.: These may clog or leak, causing burns or malfunction.
■Do not pull the gasket or charm too hard. This may cause damage or leakage.
■Do not drop or subject the product to impact. This may cause damage or a decrease in performance.
■Do not rub the design on the main body with a hard object. This may cause peeling.
■This product is for direct drinking. Pouring may cause splashing.
■When using in a car's drink holder, make sure the lid is securely closed and check the strength and stability of the holder.
■Drink beverages within the same day. There is a risk of spoilage and gas generation.
■Always wash after use. This can cause odor transfer, mold, and spoilage.
■If the ice is large, crush it before putting it in. Forcing it in may cause deformation or malfunction.
■Always check for leaks before use.
■The paint may peel off with hand cream or alcohol.
■When holding the handle, make sure the lid is securely closed.
■Do not boil.
■Do not use a dishwasher or dish dryer.
■Do not use alcohol, thinner, benzene, abrasive detergents, scrub brushes, melamine sponges, etc.
■Do not use chlorine bleach. This may cause the paint to peel off.
■It can be washed thoroughly, but do not soak it.
■If not using for a long period of time, wash and dry thoroughly and store away from high temperatures and humidity.
■If rust-like spots or limescale appear, add warm water with about 10% vinegar, leave it for 30 minutes to 1 hour without the lid, and then wash thoroughly.
■If it leaks, the gasket may be dirty, so clean it.
■Be careful not to overfill it with beverages.
■If an odor develops due to being left for a long time or due to dirt accumulation, clean it. ■If the heat retention or cold retention is not working, add the correct amount of sufficiently hot (cold) beverage. Preheating (pre-cooling) is effective.
■If there are streaks on the paint of the main body, metal powder may be attached. Remove them with a soft eraser.
■Read the instruction manual carefully and keep it in a safe place.

【Cleaning Instructions】
＜Main Body＞
■Wash with a sponge soaked in lukewarm water diluted with neutral detergent.
■Rinse thoroughly, drain the water, and dry. Wash carefully so as not to damage the inside.

■Wash with a sponge soaked in neutral detergent.
■After rinsing, shake several times to remove water and dry thoroughly. Use a small brush for detailed areas.

■Use a thin rod or similar object to remove it. Be careful not to damage it.
■When installing, make sure to fit it firmly all the way in. Failure to do so may cause leaks.
■Country of origin: China