產品介紹

A compact desk chair.
The name "Poile" comes from the French word "pile-poil" which means "just the right fit".
It has an elegant taste and is the perfect size to fit into the Eldorado Cosmetics Desk S.

產品規格

Size: W555×D555×H790~910mm (SH435~555mm)
Material: Upholstery: 100% polyester, Frame: Steel titanium plated finish

產品護理

■ Assembly type 
■Instruction manual: Available
■ Country of origin: China
■ This product is designed for household use. It cannot be used for commercial purposes.
■The lifting device for the seat of this product is a low-pressure cylinder. If you sit in front of the seat, pressure will not be applied to the lifting device and the seat will be difficult to lower, so if you want to lower the seat, put your weight on the center of the seat. In addition, children and people who are light in weight may find it difficult to lower the seat even if you perform normal and correct operations, but please note that this is a characteristic of the product.
■Do not lean on the backrest with too much force. There is a risk of falling.
■Please do not use it for any purpose other than sitting. Also, do not sit or ride on the backrest.
■Do not apply excessive load to the product by moving it from side to side or tilting it while sitting. This may cause the product to fall, deform, or be damaged.
■When moving, pushing or pulling may cause scratches on the floor. Be sure to use two or more people to lift and move it.
■Please do not use it as play equipment or stand on it as a stepping stone. Doing so may cause a fall, injury, or damage.
■Do not roll the casters and use them as a trolley. Doing so may cause injury or damage.
■Do not use in extremely humid places or wet conditions. This may cause rust. Please use in a well-ventilated place.
■Discoloration may occur if exposed to direct sunlight or lighting for a long time.
■Do not apply excessive load to any part of the product. This may cause the product to fall, deform, or be damaged.
■ There may be slight scratches, welding marks, uneven coloring, etc. on the plating finish, but please note that this is an unavoidable phenomenon due to the characteristics of the manufacturing process.